|
 |
Halley IoT Module
・ Powered by Ingenic M150, up to 1.0GHz, embedded 128MB LPDDR
・ Support Wi-Fi IEEE 802.11 b/g/n
・ Support Bluetooth 4.1
・ External interfaces to LCD, audio, SD card, USB, UART, I2C, SPI, ADC, PWM, GPIO etc.
・ Support 8MB SPI Flash
・ Open source Linux 3.10 operating system
本CPUモジュール(Halley)は、MIPSプロセッサ(M150)を搭載したIngenic社製IoTモジュールです。
HalleyにT-Kernel2.0を移植し、使いやすいベースボードとセットにした
キット(T-Kernel2/MIPS-M150)が、パーソナルメディア株式会社から販売されています。
T-Kernel2/MIPS-M150のキット(愛称：MilkCake)でLinuxを動作させる手順は、こちらを参照ください。
|
|
|
 |
|
|
|
|
PHYSICAL
|
|
Form factor
|
Modular board with 3 connector, J1(1x15), J2(1x15) and J3(2x9), and the lead pitch is 2mm.
|
|
Dimensions
|
24 x 40 x 2.4 mm.
|
|
COMPONENTS
|
|
Processor
|
Ingenic M150 SoC, up to 1.0 GHz.
- GPU: low power 2D GPU.
- VPU: H.264 720P@30fps decoding.
- Embedded high quality audio CODEC.
- Embedded 128MB LPDDR.
|
|
Memory
|
8MB SPI NOR flash.
|
|
Wi-Fi
|
Broadcom 43438 single-band 2.4GHz IEEE 802.11b/g/n.
|
|
Bluetooth
|
Bluetooth 4.1 (Bluetooth Low Energy), Bluetooth 3.0, Bluetooth 2.1 + EDR.
|
|
Clocks
|
24MHz, 32.768kHz; 26MHz (Wi-Fi/BT).
|
|
EXTERNAL INTERFACES
|
|
Display (12-pin)
|
8-bit parallel interface, 8080 and serial RGB mode.
|
|
UART (10-pin)
|
3 groups, two of them with hardware flow control.
|
|
I2S (4-pin)
|
2-channel I2S interface.
|
|
I2C (4-pin)
|
2 groups, one group complexed with PWM.
|
|
PWM (2-pin)
|
2 groups, complexed with I2C.
|
|
SPI (4-pin)
|
Up to 50Mbit/s.
|
| MMC (3-pin) |
1-bit MMC, up to 50Mbit/s and 32GB. |
| CODEC (6-pin) |
MIC, Line-in and headphone. |
| ADC (2-pin) |
2 channels 12-bit ADC. |
|
USB (4-pin)
|
USB device 2.0 and USB host 1.1. |
| JTAG (5-pin) |
Standard JTAG interface. |
|
POWER
|
|
Input
|
3.3V.
|
|
Power consumption
|
Standby (No radios): 2mW.
Standby (Wi-Fi): 10mW.
|
|
SOFTWARE
|
|
Supported OS
|
Linux 3.10.
|
|
Code availability
|
Open source.
|
| ブロック図 |
 |
|
ご不明な点がございましたらメールまたは電話にてお問合せください。
E-mail：info@shimafuji.co.jp
TEL：03-3733-8308
|
(C)2016 SHIMAFUJI Electric Incorporated All Rights reserved.
|
|
|  |
|
